(This article is not discussing how audio levels impact plugins, or what happens at an output leading to a d/a converter. This article is discussing the linear behavior of audio passing between channels within our DAW.) What you’re seeing in the picture: Going Up Taking a test tone, calibrated to -18dbfs Boosting that test tone to +762db of gain above … Read More
Why I use Expanders on DI’s.
Picture 1. In the first picture, you’ll see 4 colored bands on the analyzer. The red band is the noise floor of my interface, and it’s reading down around -110dbfs. The dark orange band at the very bottom is where the expander is pushing that noise floor to, down around -170dbfs. I usually use HoRNet Track Utility to bring the … Read More
Gain Staging: What to know, & why you shouldn’t stress too much about it!
FULL TRANSCRIPT BELOW: There’s a lot of emphasis placed on the importance of gain staging within the audio community, and while it is important to understand, it’s also exaggerated as the lynchpin between a good mixer and a bad mixer. Personally I would argue that monitoring is a much higher priority, so lets spend a few moments discussing what … Read More
Dancing Angels – From idea to finished mix!
One of my latest mixes, which you may have heard by now, is “Danging Angels” from Project DIVIDE! It’s not been officially released yet on iTunes, but you can check it out on our youtube page here. This one was fun as hell! I wrote the music on my iPhone using NanoStudio one day while waiting outside of a doctors … Read More